NA2400.1AB Monoblock Class A/B Amplifier
Alphasonik NA2400.1AB Neuron Series 2400 Watts Max Monoblock Car Amp with 4-Way Protection Circuitry Multi-Channel Bridgeable Class A/B Amplifier Low & High Level Inputs (Remote Bass Knob Included)
The NEURON Series of Amplifiers from Alphasonik will leave you astonished when you experience the power deliverance of these amplifiers and leave you in a conundrum on how it's even possible to achieve the power vs the almighty dollar. Not only did we accomplish the power that is needed and desired, but we didn't leave out any of the bells & whistles either. Things like 4-way protection circuitry and RCA throughputs to add more amplifiers. Check out the details below!
- Amplifier Includes:
(1) NA2400.1AB 2400 Watt Max Monoblock Class A/B Amplifier (1) Remote Bass Knob with Connector cable (1) Operations Manual (1) Mounting Hardware Set
- 1 x 400W @ 4 Ohms 1 x 600W @ 2 Ohms
- Features: Nickel Plated Terminals Extruded Aluminum Heat Sink Low Level Input High Level Input Low Level Output Remote Bass Knob Included Mil Spec Double-Sided Glass Epoxy Circuit Board 4-Way Protection Circuitry: Thermal, Short Circuit, Overload and DC Offset Variable Low-Pass Crossover: 50Hz - 250Hz Variable Input Sensitivity: 200mV - 6V 45Hz Bass Boost: 0 - 12dB ATC Fuse: 40 Amp x 2
- Product Dimensions: 7.01" x 2.09" x 11.81" (178 x 53 x 300mm)
High Level Inputs
High Level Inputs are an added bonus of having the capability of using the source units speaker outputs. Having High Level Inputs is needed if your source unit doesn’t have Low Level Outputs. Tap into the rear decks speakers and you’re all set! Eliminating the need for a Hi to Low Converter.
Nickel Plated Terminal Blocks
Nickel plated terminal blocks have been used on the NEURON series amplifiers. Since most cable is stranded, it is necessary to use terminal blocks to hold the strands together in fastening the connections. This type of terminal block maximizes the connection to deliver the voltage and current draw needed.
Extruded Heat Sink
Keeping the amplifier cool increases efficiency to an amplifier. To keep an amplifier cool is a combination of several things, but the most important two are power output and heatsink size. A heatsink size is not the only way to cool down an amplifier. Having increased the area of the heatsink increases the cooling dramatically. So, we extruded the heatsink so we can get the most advantageous area to aid the cooling efficiency.
Remote Bass Knob
External bass controller that will allow you to adjust the bass level remotely without having to retune the amplifier. This is a perfect solution to increase and decrease the bass when you have a wide variety of music genres. Giving you the ability to adjust the bass song by song.